Search

63 results:


51. Seminar Festigkeitsnachweis Kunststoffe Herbst 2017.pdf

Veranstalter Veranstaltungshinweise Seminar PART Engineering PART Engineering ist ein technologieorientiertes Unternehmen im Bereich der technischen Simulation. Das Produkt- und…  

52. Converse_Release_Notes_V3-8.pdf

Release Notes CONVERSE V 3.8 Interfaces   FE solver interface to LS-Dyna extended for solid elements New interface to MF GenYld and CrachFEM (MATFEM) Visual Basic  Microsoft Visual C++ 2015…  

53. Converse_Release_Notes_V3-9.pdf

Release Notes CONVERSE V 3.9 Enhancements   Orientation Mapping from 3D Source to 2D Target Several GUI and handling enhancements Interfaces  New solver interface to RADIOSS for shell elements…  

54. S-Life_FKM_Release_Notes_V3-1.pdf

Release Notes S-Life V 3.1 Bug Fixes The following bugs are fixed:     Assessment results were not saved when saving the project Information about most severe load case was not displayed for…  

55. S-Life_FKM_Release_Notes_V3-3.pdf

Release Notes S-Life V 3.3 Bug Fixes • • • Existing load case files could be overwritten when project was saved under a different name including a peak-2-peak in the same folder Applied load case…  

56. S-Life_Plastics_Release_Notes_V1-3.pdf

Release Notes S-Life Plastics V 1.3 Bug Fixes • • Display discontinuities Several minor bugfixes Core Functionalities • • • • Comprehensive static anisotropic assessment added Safety factors (only…  

57. Release_Notes_V2-3-5.pdf

Release Notes S-Life V 2.3.5 Extended Result Functionalities  von Mises stress result contour plot (V2.3.4) Extended Graphical User Interface Functionalities   Adjustable center of rotation for…  

58. S-Life_Plastics_Release_Notes_V1-1.pdf

Release Notes S-Life Plastics V 1.1 Bug Fixes • • • Existing load case files could be overwritten when project was saved under a different name including a peak-2-peak in the same folder Applied load…  

59. S-Life_Plastics_Release_Notes_V1-2.pdf

Release Notes S-Life Plastics V 1.2 Bug Fixes • • • • Not interpretable assessment results when stresses in the model exceed the ultimate strength of the material Applied influence factors did not…  

60. Converse_Release_Notes_V3-9-6.pdf

Release Notes CONVERSE V 3.9.6 Interfaces • STRI65 elements in ABAQUS now supported Interfaces • • New Source Interface for SOLIDWORKS Plastics New Export to S-Life Plastics for anisotropic strength…  

Search results 51 until 60 of 63


Top